My blog.

startup: # configure the console set console port 5005 set console ip 127.0.0.1 set console open # configure the web server set web user root пароль set web port 5006 set web open default: #load PPPoE1 load PPPoE1 load PPPoE0 PPPoE0: new -i ng0 PPPoE0 PPPoE0 set iface route 10.159.0.0/16 set iface disable on-demand set iface idle 0 set iface up-script /usr/local/etc/mpd4/add set ipcp yes vjcomp set ipcp ranges 10.159.38.242/32 10.2.0.0/0 set bundle disable multilink set bundle no noretry set auth authname Имя_юзера_в_договоре set link no acfcomp protocomp set link disable pap chap set link accept chap set link keep-alive 10 60 set link max-redial 0 open PPPoE1: new -i ng1 PPPoE1 PPPoE1 set ipcp yes vjcomp set ipcp ranges 10.2.64.3/32 0.0.0.0/0 set bundle disable multilink set bundle no noretry set auth authname имя_в_договоре set link no acfcomp protocomp set link disable pap chap set link accept chap set link keep-alive 10 60 set link max-red...

# cat fstab # Device Mountpoint FStype Options Dump Pass# /dev/ad0s1b none swap sw 0 0 /dev/ad0s1a / ufs rw 1 1 /dev/ad0s1d /home ufs rw,nosuid,nodev 2 2 #/dev/ad0s1f /var ufs rw,nodev 2 2 /dev/ad0s7 /usr ufs rw 2 2 /dev/ad0s8 /var ufs rw,nodev 2 2 /dev/acd0 /cdrom cd9660 ro,noauto 0 0 /dev/fd0 /mnt/floppy msdos rw,noauto 0 0 /dev/da0 /mnt/memory msdos rw,noauto,nosuid 0 0 /dev/da0s1 /mnt/memory1 msdos rw,noauto 0 0 #/dev/ad0s10 /mnt/linux ext2fs ro,nosuid,noexec 0 0 #/dev/ad0s9 /mnt/linux1 ext2fs ro,noauto 3 3 #/dev/ad0s8 ...

################################################################# default: set log Phase tun command set dial set login set mru 1492 set mtu 1492 set speed sync set redial 10 0 inet: set ifaddr 0.0.0.0/0 10.200.1.1/0 255.255.255.0 set authname ########### //LOGIN set authkey ############# //PASSWORD set device PPPoE:sis0 set server /var/run/ppp/ppp_inet.pid "" 0117 local: set ifaddr 10.159.38.242/32 10.159.38.242/32 255.255.255.0 set authname ########## //LOGIN set authkey ########### //PASSWORD set server /var/run/ppp/ppp_local.pid "" 0117 set device PPPoE:sis0 set mru 1492 set mtu 1492 add default HISADDR

#rc.local #/bin/sh /etc/rc.firewall.run # #ppp -auto dml_provider natd -dynamic -f /etc/natd1.conf /usr/local/bin/trafd -i ng1

# cat rc.firewall.run #!/bin/sh - # FwCMD="/sbin/ipfw" LanOut="tun0" LanIn="vr0" IpOut="10.159.38.242" IpIn="192.168.2.1" NetMask="24" NetIn="192.168.2.0" # ${FwCMD} -f flush /sbin/ipfw add check-state /sbin/ipfw add 180 divert 8668 ip from 192.168.2.0/24 to any out xmit ng0 /sbin/ipfw add 190 divert 8668 ip from any to 10.159.38.242 /sbin/ipfw add 200 divert 8669 ip from 192.168.2.0/24 to any out xmit ng1 /sbin/ipfw add 210 divert 8669 ip from any to 10.2.64.3 /sbin/ipfw add 500 allow ip from any to any via lo0 /sbin/ipfw add 600 allow ip from any to 192.168.2.0/24 in via vr0 /sbin/ipfw add 700 allow ip from 192.168.2.0/24 to any out via vr0 /sbin/ipfw add 800 allow icmp from any to any /sbin/ipfw add 900 allow tcp from any to any established /sbin/ipfw add 1100 allow tcp from any to any via vr0 /sbin/ipfw add 1200 allow udp from any to any via vr0 /sbin/ipfw add 1210 allow tcp from any to me dst-port 8085 /sbin/ipf...

#rc.conf # -- sysinstall generated deltas -- # Sat Aug 11 01:35:08 2007 # Created: Sat Aug 11 01:35:08 2007 # Enable network daemons for user convenience. # Please make all changes to this file, not to /etc/defaults/rc.conf. # This file now contains just the overrides from /etc/defaults/rc.conf. keymap="ru.koi8-r" scrnmap="koi8-r2cp866" font8x16="cp866b-8x16" font8x14="cp866-8x14" font8x8="cp866-8x8" linux_enable="YES" moused_enable="YES" sshd_enable="YES" usbd_enable="YES" hostname="sspc.local" #network_interfaces="lo0 sis0 vr0" ppp_enable="NO" ppp_mode="auto" #ppp_flags="-auto dml_provider" mpd_enable="YES" #ifconfig_lo0="inet 127.0.0.1 netmask 255.255.255.0" ifconfig_sis0="inet 192.168.1.3 netmask 255.255.255.0" ifconfig_vr0="inet 192.168.2.1 netmask 255.255.255.0" defaultrouter="" gateway_enable...